Clutch Release Bearing Replacement Cost in UAE 2026
The clutch release bearing (also called the throwout bearing) is the component that disengages the clutch when the clutch pedal is pressed. It slides along the gearbox input shaft and pushes against the pressure plate fingers to release the clutch disc. A worn or failed release bearing is often diagnosed by a grinding, squealing, or rumbling noise that occurs when the clutch pedal is depressed. This guide covers release bearing replacement costs across UAE emirates in 2026.
Clutch Release Bearing Replacement Cost by Emirate
| Emirate | Release Bearing Only | Full Clutch Kit (Recommended) |
|---|---|---|
| Dubai | AED 300 – 700 | AED 500 – 1,200 |
| Abu Dhabi | AED 280 – 680 | AED 500 – 1,100 |
| Sharjah | AED 250 – 650 | AED 450 – 1,000 |
| Ajman | AED 220 – 600 | AED 400 – 950 |
| Ras Al Khaimah | AED 220 – 580 | AED 400 – 950 |
| Fujairah | AED 200 – 550 | AED 380 – 900 |
| Umm Al Quwain | AED 190 – 520 | AED 350 – 850 |
Signs of a Failing Release Bearing
- Grinding or squealing when pressing the clutch pedal: The most distinctive symptom. The noise occurs specifically when the clutch pedal is depressed and disappears when the pedal is released. This distinguishes a release bearing fault from other drivetrain noises.
- Vibration through the clutch pedal: A worn bearing may transmit vibration to the clutch pedal, particularly noticeable at low speeds or in slow traffic.
- Difficulty pressing the clutch pedal smoothly: A failing release bearing can cause the clutch pedal to feel rough or notchy when pressed, rather than smooth throughout its travel.
Should the Release Bearing Be Replaced Alone or With the Full Clutch Kit?
Since accessing the release bearing requires removing the gearbox — the same labour required for a full clutch replacement — most UAE garages recommend replacing the full clutch kit (disc, pressure plate, and release bearing) at the same time. The additional parts cost is modest relative to the total labour, and a fully renewed clutch assembly provides much greater long-term reliability than replacing only the bearing. If the clutch disc and pressure plate are confirmed to be in good condition (low mileage vehicle, for example), bearing-only replacement is viable.