Seat Belt Sensor Repair Cost in UAE 2026
The seat belt sensor and buckle switch work together to detect whether the driver and passengers have fastened their seat belts. When this system develops a fault, the seat belt warning light stays on permanently, the warning chime sounds continuously, or the system fails to detect a fastened belt at all. This guide covers seat belt sensor repair costs across UAE emirates in 2026.
Seat Belt Sensor Repair Cost by Emirate
| Emirate | Buckle Switch Replacement | Sensor or Module Fault |
|---|---|---|
| Dubai | AED 150 – 350 | AED 350 – 700 |
| Abu Dhabi | AED 140 – 330 | AED 320 – 650 |
| Sharjah | AED 120 – 280 | AED 280 – 580 |
| Ajman | AED 110 – 260 | AED 260 – 550 |
| Ras Al Khaimah | AED 110 – 250 | AED 250 – 520 |
| Fujairah | AED 110 – 250 | AED 250 – 520 |
| Umm Al Quwain | AED 100 – 230 | AED 220 – 480 |
Common Seat Belt Sensor Faults
- Faulty buckle switch: The buckle switch detects whether the belt is latched. Worn switches are the most common seat belt sensor fault and are relatively inexpensive to replace.
- Seat belt pretensioner fault: The pretensioner tightens the belt in a collision. Once triggered, the pretensioner must be replaced. This is a more expensive repair as it involves safety-critical airbag system components.
- Seat belt control module fault: The module stores fault codes related to seat belt and airbag systems. Module replacement or reprogramming by a specialist is required.
- Wiring harness damage: UAE heat cycles can damage the wiring under the seat, triggering false fault codes.
UAE RTA Inspection and Seat Belt Faults
A non-functional seat belt or a persistent seat belt warning light will cause a failure at the UAE Muroor annual vehicle inspection. The inspection checks that seat belts are functional and that warning systems operate correctly. If your seat belt warning light remains on with the belt fastened, book a diagnostic at a GarageBuddy-listed garage before your next inspection date.