Wheel Stud Replacement Cost in UAE 2026

Wheel Stud Replacement Cost in UAE 2026

Wheel stud replacement in the UAE costs AED 30 to AED 80 per stud for parts, with total job costs of AED 80 to AED 400 depending on how many studs need replacing and the accessibility of the wheel hub on your vehicle. This guide covers what you should expect to pay, what causes wheel studs to fail in UAE conditions, and what happens if a damaged stud is left unaddressed.

Single Wheel Stud Replacement Cost UAE

A single wheel stud replacement at a UAE garage costs AED 80 to AED 150 all-in, including the cost of the stud and the labour to press out the old stud and press or thread in the new one. The cost of the stud itself ranges from AED 10 to AED 50 depending on the vehicle make. Most garages in Dubai, Abu Dhabi, and Sharjah stock wheel studs for common UAE vehicle makes.

Full Wheel Hub Stud Set Replacement Cost UAE

When multiple studs on the same wheel hub are damaged or corroded, replacing the full set is more economical than replacing one at a time. A full hub stud set for most passenger cars in UAE contains 4 to 5 studs. Full hub stud replacement costs AED 200 to AED 400 at most UAE garages. On some vehicles, the brake disc or rotor must be removed to access the studs, which adds 30 to 60 minutes to the job.

What Causes Wheel Stud Damage in UAE?

Overtightening is the primary cause of wheel stud failure in UAE. Many tyre shops use uncalibrated air impact guns that apply three to four times the correct torque specification, stretching studs beyond their elastic limit. Cross-threading occurs when wheel nuts are started at an angle and forced, damaging the thread of the stud. Corrosion from coastal salt air in Abu Dhabi, Dubai, and RAK weakens studs over time. Alloy wheel spacers that are not properly specified for the hub also cause misalignment and uneven stud loading.

Is It Safe to Drive with a Damaged Wheel Stud in UAE?

A single damaged or missing stud reduces the wheel clamping force and increases the load on the remaining studs. At UAE highway speeds above 120 km/h, this can lead to wheel nut loosening, vibration, and in worst cases, wheel separation. A damaged wheel stud should be replaced before the vehicle is driven. Always have wheel torque checked after any wheel removal in the UAE.